OSHA Training Online
Training Topic
Course Objectives
Training Requirement
Time
Price
Lockout Tagout
When lockout/tagout is required, purpose of lockout/tagout, how to properly and safely perform lockout/tagout, and responsibilities of the employer and employee
Initial, change in job assignment presenting new hazards, change in equipment, change in lockout/tagout program, and when employee demonstrates they are insufficiently trained
Approx. 40 minutes
Hand and Power Tools
How to safely use hand and power tools
Initial, new equipment, and when employee demonstrates that retraining is required
Approx. 30 minutes
Stairways and Ladders
Stair and ladder safety in construction
Initial, change in job scope hazards, change in equipment, and when insufficient training is demonstrated by an employee
Approx. 30 minutes
Health Hazards in Construction
Potential exposures to health hazards, and how to mitigate them (heavy metals such as lead, concrete and silica, welding fumes, asbestos, oils, greases, solvents)
Initial, change in job scope hazards, change in equipment, and when insufficient training is demonstrated by an employee
Approx. 40 minutes
Electrical Safety
Identify electrical hazards, describe types of electrical hazards, describe electrical protection methods, and recognize employer/employee requirements
Initial, and when employee demonstrates that retraining is required
Approx. 35 minutes
Machine Guarding
Identify main causes of machinery accidents, basic machinery parts that expose workers to hazards, requirements for safeguards, types of machine guarding and devices to safeguard machines
Initial (prior to operation of equipment), changes to equipment or process, when employee is observed circumventing guards, and annual retraining
Approx. 40 minutes
Excavations Trenching and Shoring
Safe work requirements regarding excavation, trenching, and shoring operations
Initial, and when employee demonstrates that retraining is required
Approx. 35 minutes
Walking Working Surfaces
Slips trips and falls, housekeeping, fall protection, work platforms, ladders, three points of contact, scaffolds, scissor lifts, walkways, stairs, railings
Initial, changes to workplace fall protections systems or equipment, and when employee demonstrates they are insufficiently trained
Approx. 35 minutes
Scaffolds
Safe work requirements when working with scaffolds
Initial, worksite presents new hazards, changes in equipment, and when employee demonstrates they are insufficiently trained
Approx. 25 minutes
Ergonomics
Making your work tasks ergonomically safe
Initial, work place changes affecting ergonomics
Approx. 40 minutes
Hazardous Materials
Compressed gasses, cryogenics and refrigerated liquids, liquefied petroleum gases, flammable liquids, process safety management
Initial, and annual retraining
Approx. 35 minutes
Personal Protective Equipment
How to use, inspect, clean, and store personal protective equipment
Initial, new equipment, and when employee demonstrates that retraining is required
Approx. 40 minutes
Hot Work Welding Cutting and Brazing
Safety regarding hot work procedures
Initial, when unsafe behavior is observed
Approx. 30 minutes
Heat Illness Prevention
How to work safely in high heat conditions
Initial, as needed based on scope of work
Approx. 15 minutes
Work Zone Traffic
How to safely setup work area protection, and manage vehicular traffic on the jobsite
Initial, and when employee demonstrates that retraining is required
Approx. 15 minutes
Crystalline Silica
The hazards of Crystalline Silica, and exposure prevention/reduction methods
Initial (before assigned to a task with exposure)
Approx. 15 minutes
Fatigue
Preventing and managing fatigue in the workplace
When employees are tasked with working long, extended, or irregular shifts
Approx. 15 minutes
Aerial Lifts
Aerial Lift training for the workplace
Initial, new equipment, and when employee demonstrates that retraining is required
Approx. 15 minutes